
CL-SS5050RGB60-P1-HO 24VDC or 12VDC 60LEDs / M 14.4W / M 5050 RGB 3
- in - 1 LED High Brightness Output Flexible Strip Lights adopts
12MM FPC
CL-SS5050XX60-P1-HO is an 12mm wide flexible copper strip and comes
with low voltage 20cm RGB/+ or red&black power feed cable, it
adopts 60pcs 3 chips-in-1 5050SMD LED per meters and consumes only
max 14.4W per meter. For custom lengths available from
50~5000mm,max run length of 5meters. It is designed rated IP20 for
indoor or dryp locations use.
The LED tape light offers a simplified installation to the smooth
finish surfaces by 3M adhesive on the back of the strip , or to
rough surfaces by mounting clip(order separately) .Use plug-in
flexible connectors or fast connectors (Please inquire separately)
for making turns and custom configurations.
CL-SS5050XX60-P1-HO provides both RGB and single color for options:
(1) RGB version CL-SS5050RGB60-P1-HO provides dynamic color effects
Over 16 million possible colors with red, green and blue LEDs when
Combination of RGB LED Controller (or DMX controller) . It is
fantastic LED linear tape lighting solution to decorate your
environments.
(2) Single color version CL-SS5050XX60-P1-HO LED linear tape light
is widely for use in many discreet locations and architectural
enhancements, letter sign, coving, under/above cabinet, back
lighting, and residential & commercial spaces
Note:
LED Linear ribbon is also named as flexible LED strip, or LED Tape
light,LED Strip light, LED Linear strip or LED Soft strip, and etc.
Applications:
Indoor or dry location use only,cannot use in damp or wet
locations.
● RGB version:decorative lighting for environments where need
colorful lighting changing effect.
Under/above cabinet, cove lighting or accent toe kicks, behind
sheer curtains, step, entertainment, display, night clubs,
molding accent, media room
● Single color: discreet locations and architectural
enhancements,coving, under/above cabinet, back lighting
Technical Specification:
Working Voltage: | 24VDC( or 12VDC) |
Power: | Max 14.4W/meter |
Light Source: | 3Chips-in-one 5050 SMD LED Diode |
LED Number: | 60LEDs/m |
Typical Lumens(CW Color): | Up to High output1440lm/m |
CRI(warm white or white): | Ra>80 (Ra>90 are available upon request) (For white color only) |
View Angle: | 120° |
Average LED Lifespan: | 45,000hours |
Light Color Options: | RGB Single Color [ CW(cool white), NW(Neutral White), WW (Warm White), Amber(Amber), RD(Red), GN(Green), BL(Blue),YL(Yellow) and etc.] |
Working Temperature: | -30℃~60℃ |
Humidity: | 0~90% relative humidity |
Dimension(L×W×H): | L×W12(or 10)×2.2mm (L: Max. 5meters per standard reel) |
IP Rating: | IP20 |
Driver recommended: | Max 72W for standard 5meters reel |
General Information:
Part Number | LED Type | LED No. | Operating Voltage | Power (W/m) | Luminous Flux (lm/LED) | FPC width (mm) | Max. run length (m) | View Angle | IP Rating | CRI |
CL-SS5050RGB60-P1-HO | 5050 | 60LEDs/m | 24VDC (Or 12V) | Max. 14.4W/m | / | 12mm | 5meters | 120° | IP20 | / |
CL-SS5050XX60-P1-HO | 5050 3-in-1 LED | 60LEDs/m | 24VDC (Or 12V) | Max. 14.4W/m | 20~25 | 12mm | 5meters | 120° | IP20 | CRI>80 |
Notes:
1."XX" in part number stands for the LED emitting color,Kelvin or
Wave length for above LED emitting color:
(1) Warm white (WW, 3000~3500K[standard] or 2500~3000K), Neutral
White (NW, 4000~4500K), Cool White (CW, 6000~6500K);
(2) Red(RD,625~630nm), Green (GN,520~525nm), Blue(BL,465~470nm),
Yellow (YL, 588~592nm);
2.CRI>80 or 90+ are available;
3. The lumen output of LED is inversely proportional to CRI, the
higher CRI is, the lower lumen output of LED is;
4.Specification and availability are subjected to change without
notice;
5. For rating IP65,IP67,IP68 versions , please inquire us
separately.(what is name methods for difference IP rating LED Strip in COMI
Lighting?
COMI LIGHTING LIMITED