Non Waterproof Magic RGB LED Strip IP20 WS2813 144 Pixels Addressable

Non-waterproof IP20 Magic Digital dream colour WS2813 Magic RGB LED strip 144 pixels addressable

• Signal break-point continuous transmission.
• Dual signal wires version, signal can jump to transfer.
• One pixel damaged will not affect the other LEDS working.
• The control circuit and RGB chip are integrated in a 5050 components, to form an external control pixel.
• Using the built-in signal reshaping circuit to achieve the signal waveform shaping, and no distortion of waveform of signal takes place.

Specifications:

Input voltage: DC5V Input;

Power:43.2watt/meter,86.40watt/roll;

LED resource:WS2813-RGB led(5050 SMD RGB LED with built-in improved version of WS2811S IC)

Q'ty of LED: 144leds/meter,288leds/roll, each LED is separately controlled;

IC Type: WS2813 IC(built inside the 5050 smd rgb led);

Q'ty of IC: 144IC/meter (1 IC drives 1 led chip);

Pixels:144/meter;

Grey scale: 256;

Bits/color: 8-bits/color;24bit for RGB;

FPC size: Width: 12mm, High: 2.5mm;

FPC color: WHITE PCB;

Protection rate:IP20 non-waterproof;

Colors: Full color RGB, dream color changing;

Cuttable: Every LED is cuttable;

Work temperature : 20~60℃

Package: 2meters/reel in anti-static bag;

Main feature:

one pixel damaged will not affect the other LEDs' working.

Dual signal wires version, signal can jump to transfer.

The power protection,if +5V and GND reverse polarity,the LED will not be burned.

The original electronic devices integrated,it does not cause virtual welding in the installation process.

Attention:

1. All the electronic components are integrated in a 5050 lamp beads, it does not require any other peripheral auxiliary electronic components to form a complete external control pixels. While reducing the product at the time of installation inverted Weld, caused by poor.
2. serial cascade interface, dual-line signal transmission, to achieve the functions of HTTP, which under a single pixel without causing damage to its lower pixel normal lighting, silk ho does not affect the overall results.
3. intelligent reverse polarity protection, product installation access 5V power supply in case of reverse, will not cause damage to the lamp beads.
4. built-in signal shaping circuit, any one pixel after receiving the signal through the waveform shaping and then output to ensure line waveform distortion will not accumulate.
5. the transmission distance between any two points in less than 5 meters without any additional signal amplification circuit.
6. when a refresh rate of 30 frames / sec, the number of cascades of not less than 1024 points.
7. the data transmission speed of up to 800Kbps. Light color consistency, cost-effective.

LuxLED company was established based on the JN Lighting company . At the beginning JN lighting mainly produce halogen lamps . and since 2007 we opened a new company and began the dip LED lamps such as GU10 MR16 etc. Gradually  we began producing the flexible LED strip lights , ceiling LED panel light ,COB&SMD LED lamps.

Management system

Managed with ISO9001:2008 system LuxLED company strictly control quality during each production process, also with advanced automatic machines  and ensure stable quality supply each month, the company has three production workshop for  led strips ,led panel light and varieties of LED lamps.

Over 10 years of LuxLED company Team

LuxLED Lighting Technology company is located in Changzhou, the manager who is making his contribution for the market developing and product innovation, he believes the long time LuxLED Culture and competitive position in the industry, LuxLED company will keep going with by the time.

Our LuxLED Company is still developing and continue to improve the product series and keep innovated in the fields. Guided by the basis of "high quality",the aim of "best services" and the principle of "trustworthy management",we warmly welcome partners visit our factory and share the ideas on LED lighting products and the market trend.