Non Flicker Led Flat Panel Light 600mm 48 Watt 2 Foot White Color Soft Lighting

2. Specification:

Model: AD-PAL6*6-48W

Size:600mm*600*11mm

Input Voltage:AC85V-265V
Watt: 48W
CCT: 2800-6500K
Beam angle:120°
Lumen: 3840Lm

Lumen effciency:80LM/W
CRI>80Ra
LED Brand: Taiwan Epistar
LED Type: SMD2835*240pcs
Material:Aluminum
Life Span:30000 hours
Warranty: 3 years
IP Grade: IP44

LGP: PMMA

Fixture color: sliver / white

Working Temperature(℃): -20 - +40

Ambient Temperature: less than 60°C

LED Driver: Waterproof wide voltage IC isolated constant current

PFC: 0.9

3. How to identify the quality of Flat LED panel lights?

Compared with other lighting products, LED panel lights have outstanding advantages: ultra-thin, super-bright, ultra-energy-saving, long-life, and green. However, the quality of flat LED panel lights varies greatly. Consumers do not know how to choose?

In view of the vicious competition in the market for flat panel lamp prices, a large number of unqualified products went on the market (professionals call it (bad goods, bad goods, bad goods)) and have violated the real value of LED energy saving, long life, and environmental protection, and have violated the LED. The application of technology to the significance of the integrated ceiling area has seriously affected the healthy development of integrated ceiling LED panel lights. As a manufacturer of LED panel lights, this responsibility is to introduce and explain how to select LED panel lights or identify the quality of LED panel lights.

First, look at the overall "power factor of lighting": low power factor, indicating that the use of power supply, circuit design is not good, will greatly reduce the service life of the lamp! Power factor is low, the use of a good lamp lamp life will not be long . The power factor level can be detected with the "Power Factor Meter"! The power factor of the general export LED flat panel lamp is required to reach 0.85 or more. If the power factor is lower than 0.5, it should be said that the product is not only short-lived, but also the actual power consumption is about twice as high as the nominal value. That is to say, compared with the conventional energy-saving lamps, it does not save power at all! This is why LED panel lights need to be equipped with high-quality, high-efficiency drive power! There is no "power factor meter" to detect LED lighting power factor consumers, there is a way to use the "amperometer" to detect two Similar products with the same nominal power, the greater the current and the greater the current harmonics, indicating that the actual power consumption is large, and the less power it saves! At the same time, the current is not stable, which is detrimental to lamp life and overall lamp life!

Second, look at the "heating conditions of lighting - materials, structures": LED lighting is also very important heat, the same power factor lighting and the same quality of the lamp, if the heat conditions are not good, the lamp beads work at high temperatures, light decline will Large, lighting life will be reduced. The heat-dissipating materials used mainly include copper, aluminum and PC. The heat conductivity of copper is better than that of aluminum. The thermal conductivity of aluminum is better than that of PC. Nowadays, the heat sink material is generally made of aluminum, and the best one is aluminum insert, aluminum (aluminum), (Aluminum extrusion) followed, the worst is cast aluminum, insert aluminum best cooling effect!

Third, look at the "lamp led chip quality": lamp led chip quality is determined by the chip quality and packaging technology. The quality of the chip determines the brightness and light decay of the lamp beads. A good lamp is not only bright and bright, but also has a low light decay.

Fourth, look at the lighting used to drive the power supply, the power of the service life of the other parts of the lighting, life expectancy is much shorter, the life of the power supply affects the overall life of the lighting, lamp beads theoretical life of 5-10 million hours, and the power supply Lifespan is 0.2 - 30,000 hours. The design and material selection of the power supply will determine the service life of the power supply. The appearance of aluminum alloy power supply drive is better than engineering plastics, first, its good heat dissipation, and second, the transportation and use of the process can effectively protect the inside parts are not crushed and loose, reducing the power-driven failure rate.

Fifth, see the light effect: the same lamp power, the higher the luminous efficiency, the higher the brightness, the same brightness, the smaller the power consumption, the more energy-efficient.
Six, look at the power efficiency, the higher the power efficiency as possible, the higher, indicating that the power consumption of the power itself is smaller, the greater the power output.