18w 4 Feet Led Tube Light , Ac 120v Commercial Led Tube Lighting Smd2835

LED Tube Light T5 4ft Integrated SMD283518W 1800LM Aluminum Diimmable AC120V

1. Advantages:

1. Environmental protection lamps, protect the earth
2. Efficient conversion, reduce heat
3. Quiet and comfortable, no noise
4. Soft light, protect the eyes
5. No UV, no mosquitoes
6. Voltage adjustable 85V-265V
7. Save energy, longer life
8. Strong and reliable, long-term use.

2. Description:

T5 LED tube is a type of LED tube, diameter of 5/8 inch, diameter of about 16mm. T5LED lamp is the use ultra bright LED white light as a light source, aluminum shell, cover can be made by PC tube, High temperature up to 135 degrees. Cover could be clear, forsted, and milky. The length is 30cm, 60cm, 90cm and 120cm. T5 led tube is integrated, it is with the holder(bracket). Power is 5w, 10w, 15w, 18w. also can customize 150cm with 24W. Color temperature is warm white 3000K, neutral white 4000k and cool white 6000K. The voltage is AC85-265V, which is widely used for many places.

3. T5 LED Tube 18W Technical Data Sheet:

4. Applications:

The main function of LED fluorescent tubes is energy saving, environmental protection, long life, lighting, so it is used in those places that need long time lighting, such as underground parking, almost 24 hours lighting, shopping malls, but also every day more than a dozen hours It is lighted, factories, shops, hospitals, etc., so that the more lighting, the more energy-saving effect.

5. Installation:

1. When installing, replace the original fluorescent lamp with LED tube, remove the ballast and starter, and let the 220V AC commercial power be directly applied to both ends of the LED T5 tube. (Universal and EU Common)
2. When installing, replace the original fluorescent lamp with LED tube, remove the ballast and starter, and let the 120V AC commercial power be directly added to the same side of the LED T5 tube. (American Standard)

6. Different Covers Advantages:

Basically, the cover is a PC cover, and basically no glass cover. It is manufactured by processing PC particles (chemical name: polycarbonate) and then adding a dispersion powder. PC cover can be divided according to light transmittance: transparent cover, frosted cover, milky diffusion cover.

Transparent cover: also called clear cover, the transparent cover is a transparent PC cover, this cover makes the lamp tube can see the lamp beads, very dazzling, easy to dizzy, does not meet the human requirements for light. The light transmission performance is good, reaching a light transmittance of 91%.

Frosted cover: This cover is a translucent cover that can spread out the light, but the light is not uniform enough, will not glare, light transmittance of about 88%.

Milky white diffuser cover: This cover is also the cover used by most manufacturers on the market. The universal light transmittance of this case is 83-85%; the light transmittance below 83 is totally invisible to the light bead.