Radar Motion Sensor Solar LED Flood Lights / Outdoor Aluminum Wall Light

Radar Motion Sensor Solar Powered Led Flood Lights Outdoor Aluminum Wall Light

Specification:

• Product Name: Aluminum triangle Solar Lights
• Solar panels Specifications: 5.5V 3.2W
• Battery: Lithium iron phosphate battery 3.2V 3000mah battery with charge and discharge protection board
• Battery protection voltage: 2.65-3.75V
• Battery Life: 2000 times charge cycles
• LED quantity: 30 lumens 0.5 watt LED * 48 pcs
• Luminous flux: 800lm luminous flux up to full power
• Housing material: PC + UV UV component
• Sensing modes: Microwave sensor
• Microwave power: 10.8G 2 mW
• Sensing distance: 5-10 meters
• Lighting modes: light control + strong lights when people nearby, micro-light when people leave,
• Mode Delay time: 15 seconds
• Lighting duration: can induction more than 500 times when full charged (15 seconds each)
• Charging time: 8 hours full sun off
• Waterproof grade: IP65

• weight:630g

• size:230*103*83mm

Product performance:

★ During the daytime, the system is charging,and the light is turned off,at night,the system starts lighting automatically
★ Each press of a button will replace a light mode,switch circularly

• power on:press and hold the button for 5-10 seconds to start the first mode.
• body sensor+micro-mode:when someone comes,the light will strong,when no one comes,the light will be bright slightly.
• human body induction mode:when someone comes,the light will strong,when no one comes, the light will turn off
• always light mode:it will always light at night,no induction function
• emergency light mode:it will be strong light for 30 minutes,and then turn off the light,the solar panel will time again after sensing the light.

★ It will work according to the installed mode every day, not need to switch again.
★ The delay time for a strong light is 15 seconds when someone is nearby,when in the induction area,the light is always bright, and when the person leaves the induction area for 15 seconds,the light enters into the power saving mode

How to use:

Power on:press and hold the switch for 5-10 seconds to enter the first mode.

Each press on button would change a light mode,switch circularly.

1.Body sensor+micro-mode:dim, full bright for 15 seconds when motion detected.

2.Human body induction mode:off, full bright for 15 seconds when motion detected.

3.Always light mode:it will always light at night,no induction function.

4.Emergency light mode:manual,full bright for 30 minutes.

5.Turn off.

Applications:

1. Mainly used for road, parking lot, stores, roof, expressway, subway, building.

2. Road toll booth decoration lighting, garden lighting and square,.

3. at the same time can also be used in street lamps, suitable for tunnel lighting.

And so on.

Color Temperature:

Details:

LUXTRONIC LIGHTING LTD established in 2010 (Named Grandol Industry Ltd before). We experienced from small trading firm to now medium size industrial complex. With ISO9001:2008 approval & other certificates, we specialize in: Industrial LED High Bay & Outdoor LED Flood Light.

Service:

1) Design & Prototype:

Qualified engineers provide full solutions & supports according to customers' design demands, including the Appearance Design, Function Improvement, Prototype Preparation.

2) Production:

Skillful workers & modern lines promise Stable Quality & Scheduled Delivery.

Quality Control:

1) Quality Control Process:

The production process to implement the " three inspection" , self-inspection, mutual inspection, special inspection. The manufactured products require the "three pass" : Raw material into the plant pass, Semi-finished product pass, finished off the factory pass.

2) Quality Management System Certification:

Based on the concept of "Product quality is enterprise's life", GRANDOL actively adopt the quality management system certification ISO 9001:2008/CE/ROHS/TUV/IEC.

Equipment

IES Test

The Illuminating Engineering Society of North America(IIES) is the recognized technical authority on illumination, founded in 1906, it is a world famous lighting test institute IES LM-79-08 is the testing standard for Electrical and Photometric Measurements of Solid-State Lighting Products which was released in 2008.

Integrating Sphere

Integrating Sphere llight source light emitted by the fiber, is gathered in the monochromator entrance slit, the monochromator after by monochromatic light from the monochromator exit slit injection