
1000LM Solar PIR Security Light IP65 226M Wall Security Lamp by Microwave Radar
Specifications:
1. 48 LED Solar Light: equipped with 48 super bright LED lights, it
provides excellent illumination of up to 900 lumens,
which is far brighter than other similar LED solar lights.
2. Solar Panel IP65 Waterproof Solar Lights: With solar panel, it
can convert up to 17% of the sunlight into electricity energy.
Made of durable ABS material, you don't need to worry about use in
the rain. It can also withstand all kinds of severe weather
conditions.
3.4 Lighting Modes: 4 lighting modes at your option, you can choose
any of them at your needs.
Dim light sensor mode; Sensor mode; Medium light mode; Emergency
light.
Working modes:
1.body sensor+micro-mode:when someone comes,the light will
strong,when no one comes,the light will be bright slightly.
2.human body induction mode:when someone comes,the light will
strong,when no one comes, the light will turn off
3.always light mode:it will always light at night,no induction
function
4.emergency light mode:it will be strong light for 30 minutes,and
then turn off the light,the solar panel will time again after
sensing the light.
24LED | · Solar panel:5V,1.5W · Lithium battery:3.2V,1500mAh · Maximum lumen:450LM · Charging time:6hours · Working time:depends on which mode on,more than 500times sensor after fully charged,keep 10 hours at mode 3(about half of strong lighting) · Sensing distance:5-10M/16.4ft |
48LED | · Solar panel:5V,3.2W · Lithium battery:3.2V,3000mAh · Maximum lumen:900LM · Charging time:6hours · Working time:depends on which mode on,more than 500 times sensor after fully charged,keep 10 hours at mode 3(about half of strong lighting) · Sensing distance:5-10M/16.4ft |
60LED | · Solar panel:5V,4.2W · Lithium battery:3.2V,6000mAh · Maximum lumen:1100LM · Charging time:6hours · Working time:depends on which mode on,more than 500times sensor after fully charged,keep 10 hours at mode 3(about half of strong lighting) · Sensing distance:5-10M/16.4ft |
How to use:
Power on:press and hold the switch for 5-10 seconds to enter the first mode.
Each press on button would change a light mode,switch circularly.
1.Body sensor+micro-mode:dim, full bright for 15 seconds when motion detected.
2.Human body induction mode:off, full bright for 15 seconds when motion detected.
3.Always light mode:it will always light at night,no induction function.
4.Emergency light mode:manual,full bright for 30 minutes.
5.Turn off.
Applications:
1. Mainly used for road, parking lot, stores, roof, expressway, subway, building.
2. Road toll booth decoration lighting, garden lighting and square,.
3. at the same time can also be used in street lamps, suitable for tunnel lighting.
And so on.
Details:
Luxtronic Lighting Limited
LUXTRONIC LIGHTING LTD established in 2010 (Named Grandol Industry Ltd before). We experienced from small trading firm to now medium size industrial complex. With ISO9001:2008 approval & other certificates, we specialize in: Industrial LED High Bay & Outdoor LED Flood Light.
Service:
1) Design & Prototype:
Qualified engineers provide full solutions & supports according to customers' design demands, including the Appearance Design, Function Improvement, Prototype Preparation.
2) Production:
Skillful workers & modern lines promise Stable Quality & Scheduled Delivery.
Quality Control:
1) Quality Control Process:
The production process to implement the " three inspection" , self-inspection, mutual inspection, special inspection. The manufactured products require the "three pass" : Raw material into the plant pass, Semi-finished product pass, finished off the factory pass.
2) Quality Management System Certification:
Based on the concept of "Product quality is enterprise's life", GRANDOL actively adopt the quality management system certification ISO 9001:2008/CE/ROHS/TUV/IEC.
Equipment
IES Test
The Illuminating Engineering Society of North America(IIES) is the recognized technical authority on illumination, founded in 1906, it is a world famous lighting test institute IES LM-79-08 is the testing standard for Electrical and Photometric Measurements of Solid-State Lighting Products which was released in 2008.
Integrating Sphere
Integrating Sphere llight source light emitted by the fiber, is gathered in the monochromator entrance slit, the monochromator after by monochromatic light from the monochromator exit slit injection